Call Now For Your Free Consultation
 (252) 338-1001
Home Of TUFFCAM
The Toughest Cameras In The World

Home of TUFFCAM the toughest cameras made in the world

Shook Proof
Long Lasting
Not Just Underwater 
Go Anywhere Cameras

Experience

Our team draws on decades of combined experience to create only the best cameras available. 

Quality

Our Cameras are made with the finest quality materials and manufactured in house so you know your purchase is worry-free. 

TF standard VS IP Standards

We Test At The Most Rigerous Standards 

We created our own standard tests and minimum requirements for our Tuffcam models that far exceeds Standard camera testing IP Standards. Tuffcam products must pass all of the following tests.

*The product will be connected to power and control, and will be operating during the entire testing sequence.


TF-67                                                             

  1. WATERPROOF: Product will be placed in a pressure chamber filled with fresh water. The product will then be subjected to 50 PSI while submerged for a duration of no less than 24 hours continuous operation.
  2. SHOCK VIBRATION: The product will be subjected to a single blow or drop equal to or greater than 500g in force. The product will then be subjected to a minimum of 100g blow or drop, not to exceed 1 minute between blows, for a period of at least 6 hours of continuous operation ..
  3. TEMPERATURE: The product will be brought to its maximum rated temperature for 24 hours continuous operation and then brought to its minimum rated temperature for 24 hours continuous operation.
  4. VACUUM: Product will be placed in a vacuum chamber at a minimum vacuum of 29.95 inches of mercury (Hg) for a minimum of 4 hours.
  5. POWER: The product will be operated to its minimum and maximum rated voltage for a period of 8 hours.
  6. CAVITY: Any cavity not filled with our BLACK GOOP will be evacuated via a minimum vacuum of 29.915Hg for 30 minutes, then filled with dry instrument grade Nitrogen or Argon gas.   


TF-69                                           

  1. WATERPROOF: Product will be placed in a pressure chamber filled with fresh water. The product will then be subjected to 500 PSI while submerged for a duration of no less than 24 hours continuous operation.
  2. SHOCK VIBRATION: The product will be subjected to a minimum of 25 blows or drops not to exceed 1 minute between each, at a force of 100g blow or drop. The product will then be subjected to vibration of 50g ramping up and down from 20 - 2000 Hz for a period of 8 hours.
  3. TEMPERATURE: The product will be subjected to its maximum rated temperature for 24 hours continuous operation and then to its minimum rated temperature for 24 hours continuous operation.
  4. VACUUM: Product will be placed in a vacuum chamber at a minimum vacuum of 29.99 inches of mercury (Hg) for a minimum of 4 hours.
  5. POWER: The product will be operated to its minimum and maximum rated voltage for a period of 24 hours.
  6. CAVITY: Any cavity not filled with our BLACK GOOP will be evacuated via a minimum vacuum of 29.915Hg for 30 minutes, then filled with dry instrument grade Nitrogen or Argon gas.